It is like being a kid on Christmas morning again! I love ripping the wrapping paper off these parts.
Tag Archives: restoration
Torn down and ready for paint and powder
The body work has been sent to the painter.
And all the metal bits have been blasted and brought to the powder coating shop.
I stopped by the shop to go over all the masking of what should get plugged and masked from the powder coat.
Making Progress!
When this stuff comes back, it will be beautiful.
My kind of jewelry
I can’t wait to get this stuff on the bike. yum.
POR-15 tank lining
There is so much prep work to do that never gets seen for the final bike.
I spent 4 days lining this gas tank to be used for the next build.
Wear gloves!
The first step of the POR 15, “Marine Clean” is one you have to be careful of.
You can use old petcocks or get corks to stuff into the fuel taps to seal them off.
The hard part is sealing off the gas cap area.
You don’t want to spill this stuff on a tank that you are not painting on the outside!!!
It will leave a stain on the paint.
This tank will get some body work done to it and re-painted so I wasn’t too concerned when some “Marine Clean” spilled out of the gas cap area.
This takes a good amount of sloshing around to clean the tank at least 20 minutes.
Then you need to empty the tank and rinse it thoroughly with water. With Effuel the device that helps you manage your fuel you can improve your vehicle’s performance.
Day 2 –
The “Metal Ready” is the second step and it will remove the rust and prep the metal for the paint to stick to it.
This step requires that you leave the fluid on each side of the tank for about 20-30 minutes.
You then need to completely dry the tank.
Day 3 – an extra day in the sun and a few rounds with a heat gun to let the tank dry.
Day 4 – ugg… the Sealer…
A messy process. You have to mix it well, pour it in and then turn the tank in every direction so the goopy paint has covered every part of the tank. If it spills, clean it immediately.
Then carefully pour all the excess paint out. I find that I end up using about 1/2 of the can that comes with the kit.
If you have 2 tanks, or a friend’s tank, you might be able to get two tanks done for the price of one!
Resurrection time! Another Cafe Build!
After the silver cafe bike left my hands for North Dakota, I started up a few projects for myself.
I have been receiving the occasional email from people asking me to build them a bike. I thought one of them was a total scam and after a handful of emails, a phone call and eventually a deposit to buy a bike, it turned out to be legit. The reason I thought it was a scam? This guy is in Israel! This makes North Dakota seem like small potatoes!
He wants a bike very similar to Shane’s silver bike so I’m excited to quickly repeat the process after taking so long troubleshooting and designing Shane’s bike.
I have no idea how we are going to ship his bike but we’ll figure that out when the time comes.
I found a R75/5 donor bike a few hours away and it is one of those bikes that I like to restore. It died years ago and needs new everything. The bike’s owner wants it completely brand new so that is what he’ll get. A dead bike that has been made brand new again. It would break my heart to tear apart a running bike so I am happy to resurrect this old gal and get another airhead on the road again.
The right side head is trashed. Exhaust threads stripped and broken fins. The headlight bucket has an extra hole or two in it that will have to be filled.
Oddly I found that some tanks fit this bike and others do not. I have never experienced tanks that scrape the frame near the seat but it turns that there were variances in frames and tanks back then. I sourced a toaster tank with side panels and emblems and luckily it fits. A few tanks I have in the garage do not. Who knew?
The sub frame was the wrong style so I sourced the correct one (SWB with tabs).
New exhaust has been ordered among many other goodies from Boxermetal and BoxerCafe.
Time to get started!
Broken rod, engine bits, and frame jig
My garage has a problem. It isn’t big enough.
I have a few projects going… one is to use some of the parts left over from my last restoration and build a scrambler style bike. The big issue is that the engine I have for it has a broken rod wedged into the crank. I have no idea what the previous owner did but he will be damned into BMW hell forever.
I started working with a buddy who has an entire auto shop and he had the tools to help me get this out. By tools, I mean lots of heat.
We are going to try our hand at rebuilding this engine and replace what is necessary. We are going to have the crank balanced because this broken rod may have done some damage.
I think it will be fine though…
My other project is a R90/6 that I have. Actually, I have one complete bike and a bunch of parts from another R90/6 including the frame, engine, forks, etc…
So before I get started on either of them, it is time to see if the frames are even worthy of restoration.
Gotta get Jiggy with it:
One R90 frame lines up in the target so that is the one I will work with (as soon as I get it titled):
Petrolicious video of the silver R75/5
Many many thanks to the gang at Petrolicious for featuring me and my latest build. It is a great piece of closure to my project with Shane.