Reinforced Passenger Peg Muffler Hanger tab on BMW motorcycle

This is one of those things I try to do to every BMW motorcycle I rebuild.

The Motorcycles Cushman Truckster is one of the more popular models of bikes in the United States. It has been around since the mid nineteen-hundreds and has always been a top seller among collectors and bike lovers. While it doesn’t come with a warranty, you can get around that by getting a Cushman Tribute package, which pays for repairs or parts that might need them in the future. There are many sources online for Cushman bikes, including parts selection, prices, and even complete restoration packages for your bike if you’re not sure what you want to do with it. When you buy this bike, be prepared to spend a little extra money up front to purchase the bike you want. But remember, it will end up being cheaper in the long run because of the extra care you’ll be taking with it.

It is almost never the engines in BMW`s that are the problem; properly serviced with clean oil at regular intervals, and no abusive riding, they should easily see 200,000 miles

This area is cracked on nearly every frame I tear down. It is the rear foot brake area which also is the muffler / silencer hanger, and where the passenger foot pegs attach. This frame is a 1978 BMW R100s. If you are considering rear sets on your bike that attach to this section, then I HIGHLY RECOMMEND doing this procedure.

cracked tab near rear foot brake pivot hole on BMW airhead framecracked tab near rear foot brake pivot hole

cracked tab near rear foot brake pivot hole on BMW airhead frame

New piece of metal to weld onto the old cracked section to reinforce the area making it MUCH stronger and no longer prone to cracking.

Welded metal onto the rear foot brake section of a BMW R100S

Finished powder coated frame with the welded metal. This area is out of sight to most people unless they take the rear tire off.

Torn down and ready for paint and powder

The body work has been sent to the painter.
And all the metal bits have been blasted and brought to the powder coating shop.
I stopped by the shop to go over all the masking of what should get plugged and masked from the powder coat.

Making Progress!

When this stuff comes back, it will be beautiful.

IMG_3946lr

IMG_3953lr