First off, this is a great film because it discusses actual motorcycle safety that is relevant today.
Second, it is a great film containing great footage of a R90s cruising through Germany in the 70’s.
After watching it, i gave my R100s a good bath and was appreciative for being able to own such a bike.
Monthly Archives: April 2012
POR 15 Gas Tank cleaner and coating
I’ve used this product before with reasonable success on about 3 or 4 motorcycles now. In one instance, it started to peel from the roof of the gas tank and large chunks would float in my gas. Once i removed them, everything was fine.
Something must have gone wrong with the prep or paint process. I have a feeling it was from the tank drying upside down and the POR15 dried in a puddle that eventually broke loose.
I have a bunch of tanks sitting around and an extra kit of POR 15. Unfortunately, this process takes nearly an entire day.
Follow the directions and you should be good to go.
Try to do it on a sunny day.
OUTSIDE.
It really helps to have a heat gun to speed up the process of drying out the tanks.
Prepare to get wet or splashed.
TAKE CARE TO PROTECT THE PAINT OF YOUR TANK. If any of the 3 step process gets on the tank, it may leave a streak and damage the paint.
Wear Gloves. (see below)

The first two processes require lots of sloshing liquids inside the tank. Then drying. A heat gun helps speed up the dry time. I hair dryer may work too but not as effectively.

This photo was taken after the first step, 'Marine Clean' was used. The Marine Clean removed a ton of the rust inside. When i drained it, the water came out Rust-Red.

It looks like a previous owner used the tank cream or something similar. These chunks, and many more came out after the second process 'Metal Ready'. I ended up using a long screwdriver and tried to scrape off as much of this crap as i could. It was a previous tank coating gone wrong. There is still remains of it in the tank. I hope it doesn't cause problems later on. The POR 15 is such a good sealant, i think it won't be a problem.

Tanks sealed. This process is a messy one. It would help to have an old set of petcocks to use while you slosh the sealant around. then remove them to drain the sealant and dry.
Royal Enfield pinstriping video
This guy is GOOD!
Great little video about Barrington Motor Works
I love people who quit their career to bring old motorcycle back to life. I hope to be one of them someday.
Enjoy.


