1978 BMW R100S Restoration

A 1978 BMW R100s fixed up and released back into the wild.

This bike is an absolute dream to ride. It runs amazingly smooth.

I had to go through some serious DMV hoops to get the salvaged title status back on the road with a deadline of 5 months until I incurred DMV penalty fees.  I made it to the registration day with 2 days to spare.

I cleaned, restored, replaced, rebuilt whatever it needed to get it back on the road.  The front end is from a spare R90/6 that I had lying around.

 

1978 BMW R100S with R90/6 front end. by Josh Withers

Reinforced Passenger Peg Muffler Hanger tab on BMW motorcycle

This is one of those things I try to do to every BMW motorcycle I rebuild.
This area is cracked on nearly every frame I tear down. It is the rear foot brake area which also is the muffler / silencer hanger, and where the passenger foot pegs attach. This frame is a 1978 BMW R100s. If you are considering rear sets on your bike that attach to this section, then I HIGHLY RECOMMEND doing this procedure.

cracked tab near rear foot brake pivot hole on BMW airhead framecracked tab near rear foot brake pivot hole

cracked tab near rear foot brake pivot hole on BMW airhead frame

New piece of metal to weld onto the old cracked section to reinforce the area making it MUCH stronger and no longer prone to cracking.

Welded metal onto the rear foot brake section of a BMW R100S

Finished powder coated frame with the welded metal. This area is out of sight to most people unless they take the rear tire off.